Abstract
Despite the recent advances in nature-inspired superhydrophobic surfaces with multifunctional properties such as self-healing, self-cleaning, antibacterial material, anti-biofouling, and oil-water separation in various industrial applications, there have been very few reports of robust superhydrophobic surfaces fabricated via a low-cost method. Herein, we report a rationally designed, self-healable, robust, and superhydrophobic..... More

Abstract
In this study, Cu₃Sb_1-ySn_ySe₄ (0 ≤ y ≤ 0.08) permingeatites were synthesized via mechanical alloying followed by hot pressing. The phase transformation, microstructure, charge transport parameters of the permingeatites, and their thermoelectric properties were analyzed. The permingeatites were present in a single phase with a tetragonal structure, and secondary phases..... More

Abstract
We investigated the effect of Ni doping on the electrical, thermal, and thermoelectric transport properties of FeSe₂ polycrystalline alloys. FeSe₂ alloys exhibit both n-type and p-type conduction at different temperatures and thus their practicality as a thermoelectric material is somewhat limited. In this study, Fe_1-xNi_xSe₂ polycrystalline samples with x =..... More

Abstract
Re₂Te₅ is considered a potential thermoelectric material because of its intrinsically low thermal conductivity, due to its complex crystal structure. Herein, a series of Se-doped Re₂Te₅ (Re₂Te_5-xSe_x, x = 0, 0.2, 1, and 2) samples were synthesized, and their electrical and thermal transport properties were investigated. Pure orthorhombic Re₂Te₅ phases..... More

Abstract
Bi₂O₂Se oxyselenide has been actively studied as a potential n-type thermoelectric material because of its intrinsically low thermal conductivity and high Seebeck coefficient (S). However, Bi₂O₂Se has very low electrical conductivity (σ), resulting in relatively poor thermoelectric performance. Herein, we investigate the effect of Cu addition on the electrical and..... More

Abstract
The recycling of critical metals like cobalt and nickel from spent lithium-ion batteries (LIBs) is of immense importance in sustainable manufacturing. This work aims to purify Co(II) and Ni(II) present in acidic and ammonia solutions using ion exchange. AG-1-X8 resin modified with thiocyanate anions (R₄N⁺SCN⁻ resin) was used to separate..... More

Abstract
NbFeSb-based alloys are promising p-type half-Heusler materials with excellent thermoelectric performance, thermal stability, and naturally abundant constituent elements. Alloying and doping are powerful techniques for enhancing the thermoelectric properties of half-Heusler materials. This study experimentally investigated the effects of V alloying in NbFeSb codoped with Ti, Zr, and Sn. As..... More

Abstract
Nanostructured transparent conductors have been studied intensively for application to flexible and transparent electronic devices. Among diverse nanomaterials, electrospun nanofibers provide several advantages over other nanomaterials, including a high aspect ratio, uniform distribution, and a facile fabrication process. In the present study, an electrode composed of a core-shell (PVDF)-(Al) structured..... More

Abstract
The smelting reduction of spent LIBs produces metallic alloys containing Co, Cu, Fe, Mn, and Ni. These metallic alloys can be completely dissolved by 2 M HCl solution containing H₂O₂ as an oxidizing agent. Extraction of the leaching solution with D2EHPA results in a Fe(III) free raffinate. In this work,..... More

Abstract
Silica fibers were fabricated by sol-gel reaction and an electrospinning process. A high voltage source of electricity was applied to the prepared spinning solution to form the fibers. Macroporous silica fibers were prepared using polystyrene (PS) nanospheres as templates after calcination. The pore size could be controlled by adjusting the..... More

Abstract
This study investigated the microstructure and mechanical properties of Mg-1Gd-1Y-1Zn (at.%) alloys containing designed amounts of Ce or La. The Mg₅(Gd,Zn) phase formed in the as-cast Mg-Gd-Y-Zn-Ce/La alloys and disappeared after a homogenization treatment at 500°C for 24 h. The addition of Ce and La resulted in the formation of..... More

Abstract
In this study, mechanical alloying was performed to synthesize permingeatite Cu₃Sb_1-x-ySn_xBi_ySe₄ (0.02 ≤ x ≤ 0.06 and 0.02 ≤ y ≤ 0.04) doped with Sn and Bi. Hot pressing was subsequently conducted to achieve dense sintered bodies. When the Bi content was constant, the carrier concentration increased with the Sn..... More

Abstract
High quality Hg₂Br₂ crystal grown via the physical vapor transport (PVT) process is essential for the fabrication of the acousto-optic tunable filters (AOTFs) module. The full process flow, including powder purification and crystal growth, should be systematically established, but there have been few reports about the fully established process flow..... More

Abstract
Improving solar energy conversion efficiency and reducing energy loss have become critical issues in recent decades. Photoelectrochemical (PEC) water splitting provides an ideal method for solar energy harvesting and is a key factor in decreasing the use of fossil fuels. Thus, it is extremely important to identify cost-effective, highly active,..... More

Abstract
There is growing interest in the recovery of pure palladium (Pd) compound from cemented Pd from spent electroplating solutions due to increasing demand for Pd, and there is considerable motivation to develop an efficient recovery process. In conventional methods of leaching Pd metal, HCl solutions containing oxidizing agents are employed...... More

Abstract
Nodular graphite cast iron is used in the railway and automobile industries because of its excellent workability, abrasion resistance, mechanical strength, and hardenability. To use nodular graphite cast iron in harsh environments, it is essential to examine their friction–wear properties in conjunction with the surface hardness of the materials. Therefore,..... More

Abstract
Skinnerite Cu₃SbS₃, which consists of non-toxic and low-cost elements, is a potential thermoelectric material, however, studies on its thermoelectric properties are limited. In this study, the optimal conditions of mechanical alloying (MA) and hot pressing (HP) for the synthesis of the Cu₃SbS₃ phase were investigated, and its thermoelectric properties were..... More

Abstract
Si-doped Cu₁₂Sb_4-ySi_yS₁₃ (y = 0.1-0.4) compounds were prepared using solid-state synthesis. Each specimen consisted of a single tetrahedrite phase with a densely sintered body whose relative density exceeded 98.9%. The lattice constant decreased from 1.0357 nm to 1.0336 nm as the Si content increased. When the Si doping content (y)..... More

Abstract
A dual laser beam joining process is introduced for joining dissimilar plastics. A customized laser head was built, and two different diode lasers with central wavelengths of 980 and 1940 nm were simultaneously applied to obtain PMMA/PC-1 and PC-2/ABS joints. Various experimental conditions were employed for the dual laser beam..... More

Abstract
In the present study, monodisperse silica nanospheres were synthesized using a tubular reaction system in a continuous way. Screw-type blades were inserted inside a T-mixer for static mixing of the reactant streams which consisted of TEOS and NH₄OH/H₂O diluted with ethanol, for the continuous synthesis of the silica suspension. The..... More

Abstract
Superplastic forming (SPF) is a promising approach used for manufacturing parts with complex geometries, especially in the automotive, aerospace, and marine industries. However, the wider use of this method is limited by issues of low forming rate, high-temperature requirement, non-uniform thickness distribution, and expensive base materials. The two-stage hybrid forming..... More

Abstract
Cu-based ternary chalcogenides composed of earth-abundant and nontoxic elements are considered promising thermoelectric materials, although there are few reports on them. In our previous studies, optimal mechanical alloying (MA) and hot pressing (HP) were used to synthesize Cu₃SbS₄ (famatinite) and Cu₃SbSe₄ (permingeatite). In this study, solid solutions of Cu₃SbS_4-ySe_y (y..... More

Abstract
Ge-doped tetrahedrites Cu₁₂Sb_4-yGe_yS₁₃ (y = 0.1–0.4) were prepared using mechanical alloying and hot pressing. An X-ray diffraction analysis after mechanical alloying showed a single tetrahedrite phase without secondary phases. The tetrahedrite phase was stable after hot pressing at 723 K under 70 MPa. As the Ge content increased, the lattice..... More

Abstract
Kerfless wafering is a beneficial technique that enhances the cost effectiveness of crystalline silicon (c-Si) solar cells, preventing silicon (Si) waste during diamond sawing. This study compared the advantages of three stress layers for kerfless wafering: aluminum (Al) paste, epoxy-, and electroplated nickel (Ni). These materials demonstrated the ability to..... More

Abstract
In this study, we investigated the phase formation behavior of the FeSe₂-FeTe₂ system and the evolution of their thermoelectric transport properties. A series of Fe(Se_1-xTe_x)₂(x = 0, 0.2, 0.6, 0.8 and 1) compounds were synthesized by conventional solid-state reaction. Single phase orthorhombic structures were formed, except for FeSe_0.4Te_1.6(x = 0.2)...... More

Abstract
The recovery of valuable metals such as cobalt, nickel, and lithium from spent lithium-ion batteries (LIBs) has attracted much attention. In this study, a hydrometallurgical process for the recovery of high-purity lithium compounds like Li₂CO₃ and Li₃PO₄ from dust containing Li, Co, Ni, Cu, Fe, Mn, and Si produced during..... More

Abstract
Advanced electronic materials have attracted great interest for their potential use in flexible, large-area, and printable electronic applications. However, fabricating high-performance low-voltage thin-film transistors (TFTs) for those applications with these advanced semiconductors is still challenging because of a lack of dielectric materials which satisfy both the required electrical and physical..... More

Abstract
In this study, we demonstrate high-performance optical wavelength-selective organic thin-film transistors (TFTs) that incorporate heterogeneous organic semiconductor materials, poly(3-hexylthiophene) (P3HT) and 6,13-bis(triisopropylsilylethynyl) pentacene (TIPS-pentacene). The electrical characteristics of the fabricated transistors were analyzed in the dark to determine how the P3HT:TIPS-pentacene ratio of the semiconductor affected the performance of the..... More

Abstract
In this study, Ti-10Mo alloy powder and sintered bodies were successfully fabricated using a threestep process of acid/organic solvent cleaning, hydrogenation/dehydrogenation (HDH) of bulk Ti-Mo scrap, and pressureless vacuum sintering of the alloy powder. This process can be used to recycle valuable Ti alloy. And unlike remelting-based recycling processes, in..... More

Abstract
Conductive atomic force microscopy (C-AFM) is one of the most commonly used characterization techniques for piezoelectric one-dimensional nanomaterials. However, a comprehensive understanding of the effects of certain scan parameters on the C-AFM signals remains elusive. In the present work, the dependency of C-AFM signals on the normal force, scan speed,..... More